About This Product
The Bolton Technical 10 inch pole mount accessory is to be used in conjunction with an outdoor antenna. The wall mounting bracket is to be mounted on a flat surface via screws. The pole can then be attached to the bracket with the pipe bracket and supplied hardware. When mounted correctly the pole will be upright, in the optimal position for an outdoor antenna to be mounted to the pole.
Made of high grade titanium alloy, with weatherproofing and testing guaranteed to stand up to the harshest weather, the Bolton Technical Pole Mount Accessory makes installing your outside antenna easy.
Those without a chimney or viable method to mount an outside antenna on their roof. Also helpful if the area outside your home with the best signal is far away from such an outcropping.
- Comes with U-mount assembly and Wall Bracket
- Makes home installation easy
- Bestselling signal booster accessory
- Can be mounted to building roof or wall for easy outdoor antenna setup
Recommended Add-ons
Bolton Technical 10 inch J-Pole Mount Accessory Kit
- Outdoor yagi antenna pole mount accessory
- High-grade titanium alloy for durability
- Ideal for challenging roof setups or remote areas
- Weatherproof design withstands harsh weather
- 10" long, 3/4" diameter
- Includes U-Bolt
Bolton Technical Quick Disconnect Antenna Mount
- Simple twist and turn motion for easy removal of antenna
- For 3/8 by 24 threaded antennas
- Chrome Plated Brass with Stainless Steel Spring and Pin
- For off-roading or any vehicle use
Bolton Technical Tri-Mag Antenna Mount
- Massive hold power with three 4" ceramic 8-pole magnets
- Magnets enclosed in durable ABS plastic
- Rubber pads under each magnet keep body surface safe
- 1/4" thick rust-free polished aluminum mounting plate
- 3/8" x 24 threaded antenna mount
Bolton Technical 90-Degree Layover Antenna Mount
- Easy Over Antenna Adapter
- For 3/8 by 24 threaded antennas
- Chrome Plated Brass with Stainless Steel Spring and Pin
- Spring Loaded For 90 Degree Fold-Over
Bolton Technical NMO Cellular Antenna
- Omni-Directional
- High-Gain, Up to 5.5 dBi
- Supports 700 to 2700 MHz
- NMO Mount Included
- Best for Fleet Vehicles
Bolton Technical Trunk Lip Mount for CB and Vehicle Antennas
- For attaching to vehicle truck
- Fits 3/8” by 24” threaded antennas
- Chrome Plated Brass with Stainless Steel Spring and Pin
- For off-roading or any vehicle use
The Tallboy 5G FME| Bolton Technical 12 inch Magnet Mount Cellular Antenna
- 50 Ohm Omnidirectional
- Wideband, 617-4000 MHz
- Up to 6.1 dBi Gain
- Magnet Mount
- FME-Female Connector
Bolton Omni XL – Outdoor Omni Antenna – Bolton Technical
- Versatile Omnidirectional Outdoor Antenna
- High Gain, Up to 9 dBi
- Ultrawideband, 617 – 3800 MHzFor 50 Ohm RF Systems
- Robust and Weather Resistant