Bolton Technical Low-PIM 2-Way Splitter 698-2700Mhz 50 Ohm (Wilkinson Style)

The Bolton Technical 2 way, Low-PIM splitter is an extremely low loss, high quality splitter designed for multiple indoor antenna runs. It splits the outgoing signal into two equal strength lines for continued cable runs, with a loss of up to -3 dB for each.

PIM stands for Passive Intermodulation and is measured in dBs (decibels). PIM is defined as the unwanted signal or signals generated by the non-linear mixing of 2 or more frequencies. High PIM means poor cellular reception and limited bandwidth to the end user, which in turn means lost customers to the carrier. Low-PIM means strong signals with more bandwidth for more users - in other words, better signal and lower loss within your splitter, providing increased performance.

A 2 way splitter is best used for medium-to-high powered systems that want two indoor antennas. The splitter breaks a single cable into two with up to -3 dB of loss on each end, allowing you to bypass building material and increase the effectiveness of your cellular system.

This allows one port for an indoor antenna to be multiplied into two with minimal loss. These are best used for medium-to-high powered systems to send signal to two different areas of a midsize or large building. If you want two antennas for your system, this is an essential accessory.