Read Featured Reviews From Actual Customers Read All Reviews
Eliminate Bad Cell Signal from Your Home or Office
Boost your cellular signal throughout your mid-sized home, office, or shop with the Bolton Victory Yagi / Panel Kit. It offers reliable coverage of up to 4,000* sq. ft, depending on real-world conditions. Connect multiple devices without experiencing lag or buffering when you're trying to load videos or data-reliant content.
It boosts all North American carriers (AT&T, T-Mobile, Verizon) simultaneously, giving your friends, family, or coworkers total peace of mind.
* Effective coverage area depends on quality and strength of outside cellular signal and internal building materials.
The Power of Bolton Antennas
The Bolton Quicksilver is the strongest cellular Yagi on the market. This antenna can hone in on towers up to 5 miles away, delivering a whopping +11 dBi of gain at point of entry. That’s more than enough to harness even one bar of outside signal. It captures signal in a 45 degree flashlight pattern, reaching cell towers up to 5 miles away.
The Bolton Indoor Board panel antenna further adds to the kit's power, broadcasting boosted signal in a 75-degree radius inside your building.
Works Even in Weak Signal Areas
No more complaints. Reliable cell signal throughout your home, office, workplace, or any building you need at all times. Creates a parallel network, ensuring business continues as usual, even when your WiFi goes down.
No monthly fees. No WiFi needed. The Victory allows you to triumph over your weak cell service, on your own terms.
Tough, Industrial Design. Incredible performance.
The Bolton Victory comes in a small, rugged enclosure designed to minimize its footprint in your home or building. Its design allows for a maximum of +72 dB of gain, the most allowed under current FCC guidelines.
The Bolton Victory rids your workplace of dropped calls, missed texts, and buffering cellular data. Whether doing business from home or the office, the Bolton Victory will save you critical time and make you or your employees more effective.
Carefully Designed, Yet Endlessly Customizable
The Bolton Victory Yagi / Panel kit has been created with simplicity and performance in mind. Bolton's high-quality cable and accessories provide the greatest possible signal to your booster, and this can be expanded with a number of exceptional options to meet your exact needs.
The Bolton Technical team has created the Bolton Victory Signal Booster Yagi Kit as an affordable solution for improving signal strength in your home or office, even with weak outside signal. Bolton Technical is in the business of eliminating dropped calls, slow loading times and spotty reception.
The Bolton Victory Signal booster offers up to +72 dB gain depending on outside conditions. Kitted with the highest-quality Bolton accessories, the Victory can cover up to 4,000 sq ft under best conditions, with 2,000 being most common and around 1,000 for those with extremely weak outdoor signal.
The outdoor Quicksilver Yagi antenna by Bolton Technical is one of the best on the market. Its impressive +11 dBi of gain ensures that it draws in signal from towers up to 5 miles away.
The kit includes a discreet and powerful Indoor Board wall-mounted panel antenna. It has a wide beam angle of 60 to 75 degrees and up to +8 dB gain, perfect for enhancing signal performance in a room or small cabin.
This bundle includes everything you need to quickly set up for great cell signal. It’s great for any outside cellular strength environment, whether weak or strong..
- +72 dB Bolton Victory home signal booster
- +11 dBi outdoor antenna
- +8 dBi indoor antenna
- Better data speeds and less dropped calls
- Boost 4G LTE across up to 4,000 square feet
- 5G ready
- Easy installation
- Complete kit
The Bolton Victory signal booster kit amplifies existing outdoor signal indoors.
- The outdoor antenna draws in existing cell signal
- The signal is sent via cables to the signal booster or cellular amplifier
- The signal is then sent to the indoor antenna which broadcasts it across your space
- Midsize homes or offices with weaker outside signal
- Rural cabins
- Small businesses
- Motorhomes
- Bolton Victory Home Booster
- Outside Yagi Antenna "Quicksilver 5G" 50 Ohm - F-Female Part # BT459778
- Inside Panel Antenna "Indoor Board" 50 Ohm - N-Female Part # BT512501
- Power Supply Part # BT459792
- 50 ft RG6 Cable - White Jacket - F-Male to F-Male (Outdoor) Part # BT459433
- 20 ft BT240 Cable - White Jacket - N-Male to N-Male (Indoor) Part # BT459808.
| BOOSTER STUFF | |||
|---|---|---|---|
| Uplink (MHz) | 698-716 776-787 824-849 1710-1755 1850-1915 |
||
| Downlink (MHz) | 728-746 746-757 869-894 1930-1995 2110-2155 |
||
| Input/Output Impedance | 75 Ohm in / 50 Ohm out | ||
| Maximum Gain | 72 dB | ||
| Max Uplink Power | 26 dBm | ||
| VSWR | ≤2.0 | ||
| Gain Adjustment | 20 dB (Automatic) | ||
| Cable | RG6 (50 ft.) | ||
| RF Connectors | F Female (Outside) N Female (Inside) |
||
| Power Consumption | <15W | ||
| Dimensions | 7.875 x 5 x 1.188 inches | ||
| Weight | 2 lb 3 oz. | ||
| AC Power | Input AC 110V, 60 Hz Output DC 5-15V |
||
| Cable | RG6 / SC-240 | ||
| Maximum Output Power | 1 Watt EIRP | ||
| Noise Figure | 8 dB | ||
| FCC NOTICE | This is a CONSUMER device. BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by FCC or a licensed wireless service provider. | ||
| WARNING: California's Proposition 65 | This product can expose you to chemicals including Nickel (Metallic) which is known to the State of California to cause cancer and Bisphenol A (BPA) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to https://www.p65warnings.ca.gov/. | ||
The most complicated part is installing the outdoor Quicksilver Yagi antenna. It needs to be pointed directly at the nearest tower. You can do a soft install first where no holes are drilled or fixtures fixed until you are 100% sure of placement. To do this you need to climb up onto the roof or highest point and find the area of best signal. Make sure you have a ladder, some tools like a screwdriver and an adjustable wrench, and you’re good to go. Bolton Technical has a team of install pro’s ready to help you out if you need it.
-
1. Find The Best Outside Signal:
First find the best signal INSIDE your home. You can use your cell phone and a good app like Network Cell Info Lite or Open Signal. You can also use the field test mode if you have an Android, and some iPhones. This is an essential step as it will give you the best performance for your booster kit. -
2. Install Outside Antenna
Once you know where the best signal is, you can install the outside antenna. Place it as high up as you can, on a roof or gable. Use a mounting pole to get better height. Don’t point a Yagi antenna over your roof. Choose a position where it points away from the building towards the tower. -
3. Connect to Amplifier
Use the included cable to connect the outdoor antenna to the amplifier. Make sure you put the amplifier in a well-ventilated area. -
4. Install Inside Antenna
mount the indoor panel antenna in the room where you want your signal to be strongest. Put it higher up on a wall. Run the cable from the antenna to the amplifier. Make sure there is at least 20 feet vertical or 50 feet horizontal distance between the two antennas, and the antenna and booster. -
5. Power on
Plug the amplifier into the wall and turn it on. The Victory will sync up to the antennas and show a yellow LED. Set the gain on your dial to maximum for best results. -
Technical Support & Troubleshooting
If you need help setting up your amplifier system and troubleshooting support: our trained product specialists can assist. Just call us at 1-800-470-6777 or email sales@signalboosters.com
Frequently Asked Questions
The Victory supports several devices, but we recommend no more than 8 at a time.
Yes, although you will need to mount the outdoor antenna on a roof and run a cable to your apartment.
The Victory is 5G ready, which means that it can boost data up to 5G speeds. It is future-proof and will work with new technologies.
It's not incredibly complicated, but it does have to be done correctly for best results. Have a look at our Bolton Victory Yagi user manual for more info or give us a call on 1-800-470-6777 or email sales@signalboosters.com.
This antenna just needs to be mounted on a wall correctly distanced from the booster and the amplifier. Then it just needs to be connected via the cable to the booster.
Firstly, make sure your indoor and outdoor antennas are far enough away from each other. If that still doesn’t work, make sure all your cables are connected properly. Make sure there is enough signal where your outdoor antenna is set up. If there is still no boosted signal give us a call on 1-800-470-6777 or email sales@signalboosters.com.