Cel-Fi GO RED Details
The World’s First FirstNet Booster with +100 dB Gain!
The Cel-Fi GO RED FirstNet Booster delivers cellular coverage in buildings for emergency communications from police, fire, and medical personnel. Cel-Fi GO RED with the Cel-Fi Antennas is the best way to ensure coverage in an emergency situation. Communication is not optional in critical times, rely on equipment that ensures the best coverage.
FirstNet is a new network being rolled out for Public Safety Communication Devices. This high-speed, nationwide wireless broadband network will have dedicated bands for public safety agencies and first responders. Legacy equipment does not support FirstNet dedicated band.
Buildings of 30,000 Square Feet and above may require Public Safety Equipment, across 8 million US buildings. Cel-Fi GO RED can work alongside existing equipment that works with legacy devices, so that FirstNet service is available at transition.
- Boost FirstNet Bands 12 and 14
- Up to 100dB Max Gain
- 4G / LTE Voice and Data
- Up to 15,000 Sq. Ft. Coverage
- Indoor / Outdoor NEMA 4 Rated
Cel-Fi Wave App
Cel-Fi WAVE is the software application and cloud-based portal solution used for registering, setting-up, optimizing, remotely monitoring, and updating the Cel-Fi hardware. Available on iOS, Android, Tencent, PC, and Mac devices.
Who is this for?
Great For: Multi-story building, factory, warehouse, manufacturing plant, commercial property, rural areas, and large homes under 15,000 sq ft.
For solutions up to 200,000 sq ft, look at the Cel-Fi Quatra.
Compatible With FirstNet Bands 12 and 14
The Nextivity Cel-Fi GO RED Smart Signal Booster amplifies talk & text, 3G, and 4G LTE for FirstNet Bands 12 and 14.
Complete Kit Includes:
Installation & Deployment
At Signal Boosters we provide full turnkey integration of in-building wireless (IBW) systems that amplify signal indoors, delivering the signal you need to get the job done. From the first call to post-project, Signal Boosters handles every detail personally in-house. Our team of RF engineers, system integrators, designers, and certified signal boost specialists take complete ownership of your project.
- Pre-survey
- Site survey
- Data analysis
- Floor plans
- Equipment & Pricing
- Installing equipment
- Optimization
- Documentation
- Monitoring & support
Tech Specs
| Nextivity Cel-Fi GO RED Smart Signal Booster | |
|---|---|
| Model | G32-12/14 and G32-3/20 |
| Configurations | Band 12/14; Band 3/20 |
| Rated Output Power: | Uplink, 24 dBm; Downlink, 16 dBm |
| Frequencies - Uplink | Band 12, 699-716 MHz; Band 14, 788-798 MHz |
| Frequencies - Downlink | Band 12, 729-746 MHz; Band 14, 758-768 MHz |
| Max Gain | 100 decibels (dB) |
| Antenna Connectors | SMA-Female |
| DC Power Plug and Jack | NEMA 4 rated power plugs and jack |
| Power | 9.6 – 16.5V, 2A current draw, 16W nominal power consumption |
| Dimensions | 10.73 x 3.8 x 1.71 in / 27.25 x 9.65 x 4.35 cm |
| Weight | 1.87 lbs / 0.85 kgs |
FCC NOTICE:
This is a CONSUMER device. BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by FCC or a licensed wireless service provider.
Support
The Nextivity Cel-Fi GO RED is easy to install, and trained customer/tech support
(1-800-470-6777 or sales@signalboosters.com) to assist you in every step of the way.
-
Cel-Fi GO RED Amplifier -
Power Supply