About the Hotspot SMA Omni Antenna Expansion Pack
The Hotspot Omni Antenna Expansion Pack (for SMA Female Routers) is a perfect complement to any cellular hotspot, as long as it can be plugged in via your cellular antenna port. It will greatly increase the power of your signal, bypassing building material and bringing enhanced signal directly to your hotspot. This results in more reliable internet service for you and your family via the cellular network.
Wilson Electronics omni-directional donor antennas capture signal in a 360 degree pattern, giving them less gain than more directional antennas but allowing for a simpler installation. These work best in low-lying valleys and urban areas where there is signal coming from several directions. This pack has a wideband outdoor antenna that captures existing cellular signal across the 698-2700 MHz frequencies.
This pack comes with:
- One high-quality Wilson Electronics Omni Antenna
- A 10 inch Pole Mount
- 50 feet length of Wilson400 cable
- 2 feet length of Wilson400 cable
- 50 Ohm Wilson Lightning Surge Protector
- N-Female to SMA-Male Connector
This expansion kit is designed for those who rely primarily on cellular signal to connect to the internet or want to set up a parallel network. The outside antenna bypasses troublesome building material to bring the existing outdoor cell signal directly to your router, greatly increasing its output. This pack is designed for routers with SMA-Female connector ports.
We recommend this omni pack primarily for low-lying valleys and urban areas where there is signal coming from several directions.
- Broadcast 3G & 4G LTE signal indoors
- For 50 ohm systems
- Up to +5.0 dB gain
Tech Specs
Hotspot SMA Omni Antenna Expansion Pack - WA974389 | |
---|---|
Frequency & Gain |
698-960 MHz - 2.0 dB
1710-2700 MHz - 5 dB
|
Impedance | 50 Ohms |
Maximum Input Power | 100W |
Beamwidth Horizontal/Vertical Plane | 360/60 Deg |
Connectors | SMA |
UPC | 850016974389 |