Poynting XPOL-1-5G Omni-Directional MIMO Antenna for Cellular Routers

Read Featured Reviews From Actual Customers Read All Reviews

Boost Any Signal You Need

The Poynting XPOL-1-5G captures 4G, 5G, LTE and CBRS. No matter what signal you need to boost this baby will do it. Wideband, it is backward compatible with all earlier forms of telecommunication. Boost your router's download and upload speed for a lightning-fast connection.

Small in Size, Mighty In Power

The XPOL-1-5G is housed in a weather, dust, and vandal-proof IP 65 Case. Mount it anywhere you need to, indoors or out, for better signal.

2x2 Or 4x4 Cellular
Mimo Options

With either 2X2 or 4X4 MIMO to choose from you can increase both the uploads and downloads speed of your hotspot. The XPOL-1 is a cross-polarized antenna, in fact that's where it gets its name from.

Total Compatibility

With the XPOL-1 you can boost all cellular signal within the 617-3800 MHz range, for any North American carrier. See a massive improvement in 4G, LTE, and 5G bands. It attaches directly to most routers, and can use TS-9/SMA-Female adapter for non-standard connections.

About the XPOL-1-5G Antenna

The XPOL-1 is a cross-polarized 5G, 4G, and LTE MIMO antenna, optimized for cellular networks. It works with any North American carrier, on any signal. Connect it directly to a cellular router for a massive boost in download and upload speeds. You can get it in two variants, 2X2 or 4X4. Both come with 16ft of HDF-195 cable.

Capture the latest 5G frequencies, as well as any earlier forms of telecommunication including 4G, LTE, and more. It's omnidirectional, which means it will draw in signal from anywhere around it. It captures all cellular signal within the 617-3800 MHz bandwidths. Get up to +3.5 dBi of gain to help your hotspot work at its best.

Plug your XPOL-1 directly into several MIMO-enabled routers. If it doesn’t fit your router, add a simple SMA to TS9 connection adapter. With one of these, you vastly increase the adaptability of the XPOL-1

Up to +4 dBi gain
Covers 5G, 4G and LTE
High-performance wideband antenna
Dramatically reduce lag between M2M communications
Omnidirectional for easy installation
Two cable lengths available
Small, lightweight, and hardy
Weather, dust, and vandal resistant
Greatly enhance M2M communications
Any building. Any application
Can be placed indoors or outdoors Works for any carrier, any country

Technical Specifications

Poynting XPOL-1-5G Antenna
Version	A-XPOL-0001-V2-21	A-XPOL-0001-V2-41
Ports	2	4
SISO / MIMO	2x2 MIMO	4x4 MIMO
Coax Cable Type	HDF 195	HDF 195
Coax Cable Length	5m	5m
Connector Type	SMA (M)	SMA (M)
Product Weight	0.95 kg	1.240 kg
Packaged Weight	1.05 k	1.340 kg
Frequency bands:	617 – 960 MHz 1427 – 1517 MHz 1710 - 2700 MHz 3400 – 3800 MHz
Gain (peak):	0.5 dBi @ 617 - 960 MHz 2 dBi @ 1427 - 1517 MHz 3 dBi @ 1710 - 2700 MHz 3.5 dBi @ 3400 - 3800 MHz
VSWR:	≤2.5:1 Over 90% of the band
Feed power handling:	20 W
Input impedance:	50 Ohm (nominal)
Polarisation:	Cross Polarised
Coax cable loss:	0.385 dB/m @ 900 MHz 0.507 dB/m @ 1500 MHz 0.565 dB/m @ 1800 MHz 0.666 dB/m @ 2400 MHz 0.788 dB/m @ 3000 MHz
DC short:	Yes, path to ground
Mounting bracket:	Pole/Wall mounting bracket and window suckers included
Product dimensions:	247 mm x 157 mm x 88 mm
Packaged dimensions:	270 mm x 190 mm x 100 mm
Radome material:	UV Stable ASA
Mounting Type:	Wall, pole, and window mount
Wind Survival:	≤250 km/h *Except for window mount configuration
Temperature Range (Operating):	-40°C to +70°C
Environmental Conditions:	Outdoor/Indoor
Water ingress protection ratio/standard:	IP 65
Salt Spray:	MIL-STD 810G/ASTM B117
Operating Relative Humidity:	Up to 98%
Storage Humidity:	5% to 95% - non-condensing
Storage Temperature:	-40°C to +70°C
Enclosure Flammability Rating:	UL 94-HB
Impact resistance:	IK 10
Product Safety & Environmental:	Complies with CE and RoHS Standards