Read Featured Reviews From Actual Customers Read All Reviews
The weBoost Home Room 472120 (we sometimes call it the “Single Room” here at SignalBoosters.com) is weBoost’s budget option for small areas and apartments. It enhances 4G, 4G LTE, and 3G in an area of up to 3,000 sq. ft. This weBoost signal booster kit is an upgraded version of the old Home 4G 470101, with farther reach to the cell tower to provide more reliable boosted signal.
The weBoost Home Room mobile signal booster is useful for people who rely on their cell phones for their home offices. If you require a stronger cellular signal to stay in contact with customers, vendors, remote employees, and others, the weBoost Home Room cell phone signal amplifier can help. It covers up to 3,000 sq ft under best conditions. Real-world results puts it around 200-500 sq ft. Of course, depending on your outside signal strength and outside antenna mounting option, you may get more or less coverage.
The weBoost Home Room is a great cell phone signal booster for those who need a multi-carrier, one-room/apartment/small house signal booster but do not want to deal with any type of outside installation and running cable.
- Boosts 3G & 4G LTE for any home or office up to 3,000 sq ft.
- Works for all phones & cellular devices, all US carriers.
- Complete kit: all parts included, easy install.
- No monthly fees, no need to be connected to wifi, it just works.
- For the small home/office size (1,000 to 3,000 sq ft).
- Great for: SOHO, 1-2 rooms of homes, offices and cabins.
- Not recommended for: needing whole building coverage above 3,000 sq ft.
- weBoost Home Room Amplifier
- Inside Desktop Antenna
- Outside Panel Antenna
- Power Supply
- 30 ft (x2) Low Loss RG6 Cables
- Flat Window Cable
| weBoost Home Room | |
|---|---|
| SKU | 472120 |
| Frequencies |
Band 17 - 700 MHz Band 13 - 700 MHz Band 5 - 850 MHz Band 4 - 1700/2100 MHz Band 2 - 1900 MHz |
| Max Gain | 60 dB |
| Impedance | 75 Ohm |
| Power | 110-240 V AC, 50-60 Hz, 8 W DC |
| Connectors | SMA Female / F-Female |
| Booster Dimensions | 6.5 x 4.25 x 1.25 in. |
| Weight | 0.445 lbs |
| UPC | 810005961493 |
| FCC NOTICE | This is a CONSUMER device. BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by FCC or a licensed wireless service provider. |
| WARNING: California's Proposition 65 | This product can expose you to chemicals including Nickel (Metallic) which is known to the State of California to cause cancer and Bisphenol A (BPA) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to https://www.p65warnings.ca.gov/. |
Installing any consumer signal booster setup is fairly simple, but can be a pain. The results, however, are worth it.
You’ll need some general handyman skills but nothing too specialized. If you prefer having someone else do the job, you can also contact your local general contractor, electrician, or anyone who's installed a satellite TV dish.
-
1. Find The Best Outside Signal:
Begin by finding the best signal outside your home. This is done by walking around the perimeter of your home and either using the number of bars on your phone (ok method), smartphone apps (good method), or Field Test Mode (great method) to find the best location. Pro tip: Locating the side of your home getting the best signal is the MOST CRUCIAL step of the installation process. -
2. Install Outside Antenna
The area with the best signal is where you will mount the outside antenna. Place the antenna as high up as possible, ideally on the roof, although the fascia or gable is acceptable. It's important that the outside antenna should be on or near the edge of the roof pointing away from the house to the cell tower and NOT pointing across the roof since it may cause interference with the inside antenna. Point the outside antenna at your nearest cell tower. -
3. Connect to Amplifier
Once the outside antenna is mounted, connect the included coaxial cable to the outside antenna and to the "outside antenna" port on the amplifier. Some run cable into the attic, others prefer using the window-entry cable. It's all a matter of preference and aesthetics and where you want to locate the amplifier. Pro tip: The amplifier does all the heavy lifting for boosting signal and will get warm. Keep it in a well-ventilated area. -
4. Install Inside Antenna
Once the cable is connected to the "Outside Antenna" port of the amplifier, do the same for the "Inside Antenna" port. Some prefer having the antenna mounted on the ceiling, others prefer the wall. Again, it's all a matter of preference, and use case. If you have a panel antenna, they generally perform best on the wall, and if you have a dome antenna, they usually perform best on the ceiling. If you have multiple antennas, you will need to use a splitter to divide the cable runs, and then place each antenna where you'd like them. Pro tip: Having enough separation between the two antennas prevents oscillation. Make sure there is at least 20 feet vertical or 50 feet horizontal distance between the two. -
5. Power on
Plug in the power supply to the Amplifier and to the wall outlet. The amplifier will sync up and if you see all green lights, then green means GO! Check to see near the inside antenna how much better signal you're getting. Pro tip: Any post-installation adjustments like relocating the outside antenna will require rebooting the amplifier. Simply unplug the power supply for 5-10 seconds and replug to reboot the system. -
Technical Support & Troubleshooting
If you need help setting up your amplifier system and troubleshooting support: our trained product specialists can assist. Just call us at 1-800-470-6777 or email sales@signalboosters.com